FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
CLI Commands
2-209
show
Parameters This command has one parameter:
Command Example
Root> show port profile portNumber 138
Output The port profile information is displayed as a single output for an
individual port.
portNumber Specifies the port number. Valid values are:
0–11 for the Sphereon 4300
0–15 for the Sphereon 3016
0–23 for the Sphereon 4500
0-15 for the Sphereon 4400
0-31 for the Sphereon 4700
0–31 for the Sphereon 3032
0–31 for the ED-5000
0–63 for the Intrepid 6064
0–127 and 132–143 for the Intrepid 6140
Port Number Port number.
Name Configured port name.
Blocked Blocked state. Valid values are true and false.
Operating Type Operating port type.
Operating Speed Operating port speed.
Port WWN Port WWN.
Configured Type Configured port type.
Configured Speed Configured port speed.
Beaconing Beaconing state.
FAN FAN state.
FC Address The Port Fibre Channel address.
Attached WWN The node WWN of the device at the remote
end of the link. A loop port will display the
first attached loop device.
Operational State The operational state of the port.