FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
CLI Commands
2-207
show
Purpose This command displays information about the optic.
Parameters This command has no parameters.
Command Example
Root> show port opticInfo
Output The port optic data is displayed as a table that includes the following
properties:
Output Example The show.port.opticInfo command output appears as follows:
Port Number,Tranceiver,Vendor Name,Serial Number,Part Number,Revision
Level,Supported Link Length,Extended Identifier,Date and Lot#,
0,SFP,E2O COMMS INC ,36U1348 ,EM212-LP3TA-MT ,4 ,0 0 30
15,4,07/03/03 Lot# ,
1,SFP,E2O COMMS INC ,36U3682 ,EM212-LP3TA-MT ,4 ,0 0 30
15,4,07/04/03 Lot# ,
2,SFP,E2O COMMS INC ,36U1343 ,EM212-LP3TA-MT ,4 ,0 0 30
15,4,07/03/03 Lot# ,
3,SFP,E2O COMMS INC ,36U1344 ,EM212-LP3TA-MT ,4 ,0 0 30
15,4,07/03/03 Lot# ,
4,SFP,E2O COMMS INC ,36U1349 ,EM212-LP3TA-MT ,4 ,0 0 30
15,4,07/03/03 Lot# ,
5,SFP,E2O COMMS INC ,36U1346 ,EM212-LP3TA-MT ,4 ,0 0 30
15,4,07/03/03 Lot# ,
6,SFP,E2O COMMS INC ,35C6334 ,EM212-LP3TA-MT ,4 ,0 0 30
15,4,05/24/03 Lot# ,
7,SFP,E2O COMMS INC ,36U3677 ,EM212-LP3TA-MT ,4 ,0 0 30
15,4,07/04/03 Lot# ,
Port Number The port number.
Tranceiver The transceiver type.
Vendor Name The vender name.
Serial Number The serial number.
Part Number, The part number.
Revision Level The revision level.
Supported Link
Length
The Supported link length.
Extended Identifier The extended identifier.
Date and Lot The data and lot.