FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
2-202
E/OS Command Line Interface User Manual
show
Parameters This command has one parameter:
Command Example
Root> show port nodes portNumber
Output The port nodes data is displayed as a table that includes the following
properties:
portNumber Specifies the port number. Valid values are:
0–11 for the Sphereon 4300
0–23 for the Sphereon 4500
0-15 for the Sphereon 4400
0-31 for the Sphereon 4700
FC Addr The Fibre Channel address of nodes attached to
this port. Private devices are assigned address
strings of 0000 followed by the two-digit
hexadecimal Arbitrated Loop Physical Address
(AL_PA), instead of the 6 digit hexadecimal
number presented for public devices.
BB Crdt Represents the maximum number of
outstanding frames which can be transmitted
without causing a buffer over-run condition at
the receiver.
RxFldSz Buffer-to-buffer Receive Data Field Size from
the FLOGI received from the attached N_Port.
COS Class of service: 1; 2; 3; 4; 5; 6; F; 1,2; 2,3…
Port Name The port worldwide name of the attached
device.
Node Name The node worldwide name of the attached
device.