FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
CLI Commands
2-195
show
Output The configuration data is displayed as a table that includes the
following properties:
Output Example
openSysMS State: disable
Host Control State: enable
show.openTrunking.config
Syntax config
Purpose This command displays the trunking configuration for all ports.
Parameters This command has no parameters.
Command Example
show openTrunking config
Output The device information is displayed as a table that includes the
following:
openSysMS State The Open System Management Server state.
Host Control State The Open System Management Server Host
Control state.
Unresolved
Congestion
The current enabled/disabled state of the
unresolved congestion trunking feature.
Backpressure The current enabled/disabled state of the
backpressure trunking feature.
Low BB_Credit
Threshold
The current threshold setting of the low
BB_Credit threshold trunking feature listed as a
percentage. If this value is configured to be the
default, (default) is displayed alongside the
threshold value. The default value is 75%.
Congestion
Threshold Table
A table mapping each port number on the
switch to a corresponding threshold setting.
The threshold is listed as a percentage. If this
value is configured to be the default,
(default) is displayed alongside the
threshold value. The default value is 60%