FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
2-190
E/OS Command Line Interface User Manual
show
Output The device information is displayed as a table that includes the
following properties:
Output Example The output from the show.loginServer command appears as follows:
Port BB Crdt RxFldSz COS Port Name Node Name
---- ------- ------- --- ----------------------- -----------------------
0 10 2,3 00:11:22:33:44:55:00:77 20:11:22:33:44:55:66:77
1 10 2 00:11:22:33:44:55:00:78 20:11:22:33:44:55:66:78
4 10 2,3 00:11:22:33:44:55:00:79 20:11:22:33:44:55:66:79
7 10 2,3 00:11:22:33:44:55:00:80 20:11:22:33:44:55:66:80
8 10 2 00:11:22:33:44:55:00:81 20:11:22:33:44:55:66:81
10 10 2,3 00:11:22:33:44:55:00:82 20:11:22:33:44:55:66:82
11 10 2,3 00:11:22:33:44:55:00:83 20:11:22:33:44:55:66:83
12 10 3 00:11:22:33:44:55:00:84 20:11:22:33:44:55:66:84
13 10 2,3 00:11:22:33:44:55:00:85 20:11:22:33:44:55:66:85
15 10 2,3 00:11:22:33:44:55:00:86 20:11:22:33:44:55:66:86
show.nameServer
Syntax nameServer
Purpose This command displays information from the name server database
for devices attached to this switch. Note that it is possible to have
Port The port number where the device is attached.
BB Crdt The Buffer to buffer credit (BB_Credit). The
maximum number of remaining frames that can
be transmitted without causing a buffer
overrun condition at the receiver.
RxFldSz The buffer-to-buffer receive data field size from
the FLOGI received from the attached N_Port.
COS The class of service (for example, 1; 2; 3; 4; 5; 6;
F; 1,2; 2,3).
Port Name The port WWN of the attached device.
Node Name The node WWN of the attached device.