FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
2-186
E/OS Command Line Interface User Manual
show
Parameters This command has no parameters.
Command Example
show ficonCUPzoning
Output The data is presented as a table with the following properties:
Output Example
FICON CUP Zoning State: Enabled
Host Control List
-----------------------
01:02:03:04:05:06:07:08
09:0A:0B:0C:0D:0E:0F:00
show.ficonMS
Syntax ficonMs
Purpose This command displays the FICON MS settings.
NOTE: This command is displayed on a Sphereon 3016 only if the feature
key is installed.
Parameters This command has no parameters.
Command Example
Root> show ficonms
Output The data is displayed as a table that includes the following
properties:
Output Example
Ficon MS State: Disabled
Ficon MIHPTO (seconds): 180
FICON CUP
Zoning State
The enabled state of the FICON CUP Zoning
feature
Host Control List List of 0-8 control hosts, displays “empty” for
control host list with no members.
Ficon MS State The state of the FICON MS feature.
Ficon MIHPTO The Ficon MIHPTO value in seconds.