FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
2-180
E/OS Command Line Interface User Manual
show
show.fabric.topology
Syntax topology
Purpose This command displays a text description of the fabric. The principal
switch in the fabric will have a "*" next to it.
Parameters This command has no parameters.
Command Example
Root> show fabric topology
Output The features data is displayed as a table that includes the following
properties.
Output Example The output from the show.fabric.topology command appears as follows:
Switch WWN DID OutPrt Remote WWN RemDID RemPrt
----------------------- --- ------ ----------------------- ------ ------
02:30:40:32:34:34:32:21* 2 24 24:45:73:49:05:43:22:11 10 2
25 24:45:73:49:05:43:22:11 10 3
26 24:45:73:49:05:43:22:11 10 4
24:45:73:49:05:43:22:11 10 2 02:30:40:32:34:34:32:21 2 24
3 02:30:40:32:34:34:32:21 2 25
4 02:30:40:32:34:34:32:21 2 26
21:23:21:25:76:43:23:21 10 7 02:30:40:32:34:34:32:21 15 3
02:30:40:32:34:34:32:21 15 3 21:23:21:25:76:43:23:21 10 7
Switch WWN The WWN of the switch at the local end of the
ISL.
DID The Domain ID of the switch at the local end of
the ISL.
OutPrt The port number at the local end of the ISL.
Remote WWN The WWN of the switch at the remote end of
the ISL.
RemDID The domain ID of the switch at the remote end
of the ISL.
RemPrt The port number at the remote end of the ISL.