FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

CLI Commands

2-179

show

Parameters This command has no parameters.

Command Example

Root> show fabric nodes

Output The data is displayed as a table that includes the following

properties:

Output Example The output from the show.fabric.nodes command appears as follows:

Domain ID Node WWN

--------- -----------------------

2 12:34:7C:CC:57:86:37:23

2 98:45:75:25:7B:35:30:34

2 27:35:3E:69:63:34:22:11

2 29:81:24:74:57:32:48:98

6 25:F2:35:7A:25:22:11:0B

18 F1:23:96:43:56:A3:AA:12

18 45:4D:2B:22:62:9B:19:91

show.fabric.principal

Syntax principal

Purpose This command displays the WWN of the principal switch in the

fabric.

Parameters This command has no parameters.

Command Example

Root> show fabric principal

Output The data is displayed as a table that includes the following

properties:

Output Example

Principal Switch WWN: 00:00:00:00:00:00:00:00

Domain ID Domain ID of the switch to which the device is

attached.

Node WWN The WWN of the fabric attached node.

Port WWN The WWN of the fabric attached port

Principal Switch

WWN

The WWN of the principal switch in the

fabric.