FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
CLI Commands
2-177
show
Output This command displays the following data:
Output Example The output of the show.fabricLog.noWrap command appears as
follows:
Count Date/Time Description
---------- --------------- -------------
11 11/24/03 04:18P Port RSCN
Data: RSCN Reason=2301, Port Offline/Online=26437, Ports 0, 1, 2, 3, 4, 5, 6,
7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24,
25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39 40, 41, 42,
43, 44, 45, 46, 47, 48, 49,50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60,
61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78,
79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96,
97, 98, 99, 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, 110, 111,
112, 113, 114, 115, 116, 117, 118, 119, 120, 121, 122, 123, 124, 125,
126, 127, 132, 133, 134, 135, 136, 137, 138, 139, 140, 141, 142, 143,
144
10 12/04/03 08:15A Fabric Operational
Data:
9 12/04/03 08:15A Paths Operational
Data:
8 12/04/03 08:15A Zone Merge Completed
show.fabricLog.wrap
Syntax wrap [clear]
Purpose This command displays the contents of the wrapping region of the
fabric log. The log entries will not persist over IMLs or power cycles;
it will not be stored in NV RAM.
NOTE: This log will begin to wrap after the log is filled.
Count A constantly incrementing counter.
Date/Time The date and time of the log entry.
Description A description of the log entry.
Data Extended data that is associated to the log
entry.