FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
2-176
E/OS Command Line Interface User Manual
show
Output Example The output from the show.eventLog command appears as follows:
Date/Time Code Severity FRU Event Data
---------------- ---- -------- ----- -----------------------------------
04/12/01 10:58A 375 Major CTP-0 00010203 04050607 08090A0B 0C0D0E0F
04/12/01 9:58A 385 Severe CTP-0 00010203 04050607 08090A0B 0C0D0E0F
04/11/01 7:18P 395 Severe CTP-0 00010203 04050607 08090A0B 0C0D0E0F
show.fabricLog.noWrap
Syntax noWrap [clear]
Purpose This command displays the contents of the non-wrapping region of
the fabric log. The log entries will not persist over IMLs or power
cycles; it will not be stored in NV RAM.
NOTE: This log will not wrap. The log will stop collecting entries after is it
filled.
Parameters This command has one optional parameter. If no parameter is
specified, then the 200 entries of the log will be displayed.
Command Example
Root> show fabricLog noWrap
Severity The severity of the event. The values are:
Major—Unit operational (major failure).
Minor—Unit operational (minor failure).
Severe—Unit not operational. The causes are
either that the switch contains no operational
SBAR cards or that the system shuts down due
to CTP thermal threshold violations.
Info—Unit operational (information only).
FRU The FRU and FRU position, where applicable.
Event Data The 32-byte hexadecimal description of the
event in words.
clear Removes all entries from the log.