FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
2-174
E/OS Command Line Interface User Manual
show
show.epFrameLog.wrap
Syntax wrap [clear]
Purpose This command displays the contents of the wrapping region of the
FC2 frame log. Specifying the optional keyword clear clears all entries
from both the wrapping and the non-wrapping regions of the log.
The log entries will not persist over IMLs or power cycles, and will
not be stored in NV RAM. This log will not include entries for frames
discarded by hardware, such as un-routable class-3 frames unless
class-3 discard is disabled in the hardware.
NOTE: This log will begin to wrap after the log is filled.
Parameters This command has one optional parameter. If no parameter is
specified, then the 1000 entries of the log will be displayed.
Command Example
Root> show epFrameLog wrap
Output This command displays the following data:
clear Adding the optional clear parameter removes
all entries from both the wrapping and the
non-wrapping regions of the log.
Count A constantly incrementing counter.
Date/Time Time of the frame.
Port # The port number.
Direction Direction of the frame through the port (I =
In, O = Out, D= Discard).
SOF Start of frame.
EOF End of frame.
Header The 24 byte FC frame header.
PL (size in bytes) The first 32 bytes of the FC frame payload.