FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
2-172
E/OS Command Line Interface User Manual
show
show.epFrameLog.noWrap
Syntax noWrap [clear]
Purpose This command displays the contents of the non-wrapping region of
the FC2 frame log. Specifying the optional keyword clear removes all
entries from the non-wrapping region of the log.
The log entries will not persist over IMLs or power cycles; it will not
be stored in NV RAM. This log will not include entries for frames
discarded by hardware such as un-routable Class-3 frames, unless
Class-3 discard is disabled in the hardware.
NOTE: This log will not wrap. The log will stop collecting entries after is it
filled.
Parameters This command has one optional parameter. If no parameter is
specified, then the 500 entries of the log will be displayed.
Command Example
show epFrameLog noWrap
Output This command displays the following data:
clear Adding the optional clear parameter removes
all entries from the non-wrapping region of
the log.
Count A constantly incrementing counter.
Date/Time Time of the frame.
Port # The port number.
Direction Direction of the frame through the port (I =
In, O = Out, D= Discard).
SOF Start of frame.
EOF End of frame.
Header The 24 byte FC frame header.
PL (size in bytes) The first 32 bytes of the FC frame payload.