FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

CLI Commands

2-165

perf

Parameters This command has no parameters.

Command Example

Root> perf thresholdAlerts throughput showUtilTypeTable

Output Example The output from the perf.thresholdAlerts.throughput.showUtilTypeTable

command appears as follows:

NumberUtilization Type

----------------------------

1 Transmit Traffic (Tx)

2 Receive Traffic (Rx)

3 Both (Tx/Rx)

perf.traffic

Syntax traffic portNumber

Purpose This command displays port traffic counters for a specified port.

Parameters This command has one parameter:

Command Example

Root> perf traffic 2

Output The port traffic counter data is displayed as a table that includes the

following statistics, along with a wrap count for each corresponding

counter.

portNumber Specifies the port number. Valid values are:

0–11 for the Sphereon 4300

0–15 for the Sphereon 3016 and 3216

0–23 for the Sphereon 4500

0–31 for the Sphereon 3032 and 3232

0-31 for the Sphereon 4700

0-15 for the Sphereon 4400

0–63 for the Intrepid 6064

0–127 and 132–143 for the Intrepid 6140

Port The port number.

Rx% The received link utilization percentage.

Tx% The transmitted link utilization percentage.