FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2-158

E/OS Command Line Interface User Manual

perf

Output Example

Name Type State

---------------------------------------------------- ----------------- --------

Throughput Threshold #1 Rx Util Enable

Threshold for CRC CRC Errors Disabled

Safety #2 Logic Lnk Err Set Enabled

Safety #1 Cls2 BusiedFrms Disabled

perf.thresholdAlerts.throughput.addAlert

Syntax addAlert name

Purpose This command configures a new throughput threshold alert and

assigns it a name. The new alert is assigned default settings that can

then be changed using the other throughput threshold alert

commands.

The default settings for a new counter threshold alert are as follows:

• Ports: None

• Utilization Type: None

• Utilization Percentage: 50%

• Duration: 30 minutes

• Interval: 60 minutes

• Alert State: Disabled

LIPs Detected CTA - Loop Initialization

Primitive Detected

LIPs Generated CTA - Loop Initialization

Primitive Generated

State The enabled state of the CTA. Either enabled or

disabled.