FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
2-154
E/OS Command Line Interface User Manual
perf
perf.thresholdAlerts.counter.show
Syntax show name
Purpose This command displays the settings for an individual counter
threshold alert.
Parameters This command has one parameter:
NOTE: The output of this command truncates threshold alert names that are
longer than 51 characters. If you specify lengthy names, you can display the
complete name by entering the comma-delimited mode using the
commaDelim command. For more information, see Using the commaDelim
Command on page 1-18.
Command Example Root> perf thresholdAlerts counter show checklinks
Output Example The output from the perf.thresholdAlerts.counter.show command
appears as follows:
Index: 3
Name: Example_CRC_Error_Finder
Ports: 2,4-7,20-24
Counter Statistic: CRC Errors
Increment: 5
Interval: 30
Alert State: Disabled
perf.thresholdAlerts.counter.showStatisticTable
Syntax showStatisticTable
Purpose This command displays the table of different statistic counters that
can be added to a counter threshold alert. This table is used for
reference only.
Parameters This command has no parameters.
name The name of a threshold alert as defined by the
command perf.thresholdAlerts.counter.addAlert,
described on 2-149.
You can specify all instead of a name, which
means that all threshold alerts are displayed.