FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
2-138
E/OS Command Line Interface User Manual
perf
Output Example The output from the perf.openTrunking.show command appears as
follows:
Port Number: 1
Congestion Threshold (%): 56
Flows Rerouted To: 26739
Flows Rerouted From: 23987
Unresolved Congestion: Enabled
Backpressure: Disabled
Low BB_Credit Threshold (%): 75 (default)
perf.openTrunking.unresCongestion
Syntax unresCongestion unresolvedCongestionState
Purpose This command configures the Unresolved Congestion state of the
OpenTrunking configuration. If the state is configured to be enabled,
an unresolved congestion entry is made to the Event Log and an
SNMP trap is generated if SNMP is configured.
Parameters This command has one parameter:
Command Example
Root> perf openTrunking unresCongestion 1
Unresolved
Congestion
The current enabled/disabled state of the
unresolved congestion trunking feature. (The
indicated state applies to every port on the
product.)
Backpressure The current enabled/disabled state of the
backpressure trunking feature. (The indicated
state applies to every port on the product.)
Low BB_Credit
Threshold
The current threshold setting of the Low
BB_Credit Threshold trunking feature. If the
value is a default value, (default) is displayed
next to the percentage. (The indicated value
applies to every port on the product.)
unresolvedCongestionState This parameter can be set to enable or
disable the Unresolved Congestion
state of the OpenTrunking
configuration. Boolean 1 and 0 values
may also be substituted.