FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
CLI Commands
2-137
perf
Command Example Root> perf opentrunking setState 1
NOTE: The command config.features.openTrunking on page 2-9 has
functionality that is identical to this command.
perf.openTrunking.show
Syntax show portNumber
Purpose This command displays the current OpenTrunking configuration per
port.
Parameters This command has one parameter:
Command Example
Root> perf openTrunking show 11
Output The OpenTrunking configuration data is displayed as a table that
includes the following statistics:
portNumber Specifies the port number. Valid values are:
0–11 for the Sphereon 4300
0–15 for the Sphereon 3016 and 3216
0-15 for the Sphereon 4400
0–23 for the Sphereon 4500
0-31 for the Sphereon 4700
0–31 for the Sphereon 3032 and 3232
0–63 for the Intrepid 6064
0–127 and 132–143 for the Intrepid 6140
Congestion
Threshold
The threshold is listed as a percentage. If the
value is a default value, (default) is
displayed next to the percentage.
Flows Rerouted
To
Trunking statistic displaying flows rerouted to
the specified port. (These statistics are cleared
by the perf.clearStats command.)
Flows Rerouted
From
Trunking statistic displaying flows rerouted
from the specified port. (These statistics are
cleared by the perf.clearStats command.)