FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

CLI Commands

2-133

perf

Output Example The output from the perf.errors command appears as follows:

Port 2

StatisticCount

---------------------

Prim Seq Err753452

Disc Frms351269

Inv Tx Wrds2953184

CRC Errs1842953

Delim Errs2953184

Addr Id Errs1842953

FrmsTooShrt40059

perf.link

Syntax link portNumber

Purpose This command displays port link counters for a single port.

Parameters This command has one parameter:

Command Example

Root> perf link 2

Output The port link counter data is displayed as a table that includes the

following statistics:

portNumber Specifies the port number. Valid values are:

0–11 for the Sphereon 4300

0–15 for the Sphereon 3016 and 3216

0–23 for the Sphereon 4500

0–31 for the Sphereon 3032 and 3232

0-31 for the Sphereon 4700

0-15 for the Sphereon 4400

0–63 for the Intrepid 6064

0–127 and 132–143 for the Intrepid 6140

Port The port number.

OLS In The number of offline sequences initiated by the

attached N_Port.

OLS Out The number of offline sequences initiated by

this switch or director port.