FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
2-130
E/OS Command Line Interface User Manual
perf
Parameters This command has one parameter:
Command Example
Root> perf class3 2
Output The port Class 3 counter data is displayed as a table that includes the
following statistics, along with a wrap count for each corresponding
counter.
Output Example The output from the perf.class3 command appears as follows:
Port 2
Statistic Wrap Count
---------------- -------- --------
RxFrames 3 2953184
portNumber Specifies the port number. Valid values are:
0–11 for the Sphereon 4300
0–15 for the Sphereon 3016 and 3216
0-15 for the Sphereon 4400
0–23 for the Sphereon 45000
0–31 for the Sphereon 3032 and 3232
0-31 for the Sphereon 4700
0–63 for the Intrepid 6064
0–127 and 132–143 for the Intrepid 6140
Port The port number.
RxFrames The number of Fibre Channel Class 3 frames
that the port has received.
TxFrames The number of Fibre Channel Class 3 frames
that the port has transmitted.
RxWords The number of Class 3 4-byte words within
frames that the port has received.
TxWords The number of Class 3 4-byte words within
frames that the port has transmitted.
Disc Frames The number of Class 3 frames that have been
discarded upon receipt by this port. There are
no FBSYs (Fabric Busy link response) or FRJTs
(Frame Reject link response) generated for Class
3 frames.