FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

CLI Commands

2-119

config

Parameters This command has two parameters:

Command Example

Root> config zoning deleteWwnMem TheNotSoUltimateZone

10:00:00:00:C9:22:9B:AB

config.zoning.deleteZone

Syntax deleteZone zoneName

Purpose This command deletes a zone from the zone set in the work area.

NOTE: Changes are not activated on the switch until the

config.zoning.activateZoneSet command is issued.

Parameters This command has one parameter:

Command Example

Root> config zoning deleteZone TheLeastUltimateZone

zoneName Specifies the name of the zone that contains the

member to be deleted.

wwn Specifies the WWN of the member to be deleted

from the zone. The value of the WWN must be

in colon-delimited hexadecimal notation (for

example, AA:00:AA:00:AA:00:AA:00).

zoneName Specifies the name of the zone to be deleted.