FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
2-118
E/OS Command Line Interface User Manual
config
config.zoning.deletePortMem
Syntax deletePortMem zoneName domainId portNumber
Purpose This command deletes a domain ID and port number for a zone
member in the specified zone in the work area.
Parameters This command has three parameters:
Command Example
Root> config zoning deletePortMem TheUltimateZone 10 5
config.zoning.deleteWwnMem
Syntax deleteWwnMem zoneName wwn
Purpose This command removes a WWN member from a zone that is in the
work area.
zoneName Specifies the name of the zone that contains the
member to be deleted.
domainId Specifies the domain ID of the member that has
to be deleted from the zone. Valid domain IDs
are in the range 1–31.
portNumber Specifies the port number of the member to be
deleted from the zone. Valid port numbers
values are:
0–11 for the Sphereon 4300
0–15 for the Sphereon 3016 and 3216
0–23 for the Sphereon 4500
0–31 for the Sphereon 3032 and 3232
0–31 for the ED-5000
0–63 for the Intrepid 6064
0–127 and 132–143 for the Intrepid 6140