FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
2-112
E/OS Command Line Interface User Manual
config
Parameters This command has one parameter:
Command Example
Root> config system location Everywhere
config.system.name
Syntax name systemName
Purpose This command sets the system name attribute.
Parameters This command has one required parameter:
Command Example
Root> config system name JoeSwitch
config.system.show
Syntax show
Purpose This command shows the system configuration.
Parameters This command has no parameters.
Command Example
Root> config system show
Output The system configuration is displayed as a table that includes the
following properties:
systemLocation Specifies the new system location for the
director or switch. The location can contain
0–255 characters.
systemName Specifies the new system name for the switch or
switch. The name can contain 0–24 characters.
Name The system name.
Description The system description.