FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
2-110
E/OS Command Line Interface User Manual
config
config.system
With the system command, the configuration branch enters the
system configuration branch. All commands under this branch
operate on a particular system attribute. System attributes are generic
attributes that are not specific to Fibre Channel, and thus would be
present on any product.
config.system.contact
Syntax contact systemContact
Purpose This command sets the system contact attribute.
Parameters This command has one parameter:
Command Example
Root> config system contact Joe
config.system.date
Syntax date systemDate systemTime
Purpose This command sets the system date and time.
systemContact Specifies the new system contact string for the
director or switch. The contact can contain
0–255 characters.