FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
2-108
E/OS Command Line Interface User Manual
config
Parameters This command has one parameter:
Command Example
Root> config syslog deleteserver 2
config.syslog.setLogConfig
Syntax setLogConfig logName state
Purpose This command enables syslog support for the given log.
Parameters This command has two parameters:
Command Example
Root> config syslog setLogConfig event enable
config.syslog.setState
Syntax setState enabledState
Purpose This command sets the enabled or disabled state for the syslog
feature.
Parameters This command has one parameter:
Command Example
Root> config syslog setState enable
index The index number of the server to be deleted.
Possible values are 1 to 3.
logName The log type. Possible values are Event,
Trunking, Link, Security, Audit, Fabric, and
Frame.
state This parameter can be set to enable or disable.
Boolean 1 and 0 values may also be
substituted. If the state is enabled, messages
for that log will be sent to the configured
syslog servers.
enabledState This parameter can be set to enable or disable.
Boolean 1 and 0 values may also be
substituted.