FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
CLI Commands
2-107
config
Parameters This command has one parameter:
config.syslog
The syslog feature records events such as logins, configuration
changes, and error messages that occur on the switch. If an error
condition occurs, the switch attempts to write an entry to the system
log. The syslog feature will send the user requested logs (supported
logs) to the syslog service on a remote host.
You may configure up to three remote syslog recipients. A single
facility may be configured for each remote syslog recipient and the
default is Local 0. All syslog facilities are limited to the local use facility
(Local 0 - Local 7).
config.syslog.addServer
Syntax addServer index IP facility
Purpose This command configures a syslog server at a given index.
Parameters This command has three parameters:
Command Example
Root> config syslog addserver 1 121.34.56.78 Local1
config.syslog.deleteServer
Syntax deleteServer index
Purpose This command deletes a syslog server configuration.
zoningRSCNStat
e
This parameter can be set to enable, disable, true,
or false. Boolean 1 and 0 values may also be
substituted.
index The index number for the server. Possible
values are 1 to 3.
IP The IP address of the server.
facility The facility for the server. Possible values are
Local0 - Local7.