FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
2-106
E/OS Command Line Interface User Manual
config
config.switch.webState
Syntax webState webEnabledState
Purpose This command sets the state of the web interface. When disabled,
access through the web interface will be turned off.
Parameters This command has one parameter:
Command Example
Root> config switch webState enable
config.switch.zoneFlexPars
Syntax zoneFlexPars zoneFlexParstate
Purpose This command configures the state of Zone FlexPars.
Parameters This command has one parameter:
Command Example
Root> config switch zoneFlexPars fabric
config.switch.zoningRSCN
Syntax zoningRSCN zoningRSCNState
Description This command sets the state of Zoning RSCNs.
webEnabledState This parameter can be set to enable or disable.
Boolean 1 and 0 values may also be
substituted.
zoneFlexParsState This parameter can be set to fabric and none.
When set to fabric, RSCNs will only be sent to
affected fabric members when zoning
information changes. When set to none,
filtering of RSCNs will not take place, and
RSCNs will be sent to all zoneset members
when zoning information changes.