FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
CLI Commands
2-105
config
Output Example The output from the config.switch.show command appears as follows:
R_A_TOV: 20
E_D_TOV: 4
Preferred Domain Id: 1
Switch Priority: Principal
Speed: 2 Gb/sec
Rerouting Delay: Enabled
Interop Mode: Open Fabric 1.0
Insistent Domain Id: Disabled
Domain RSCN: Enabled
Zoning RSCN: Disabled
Limited Fabric RSCN: Disabled
Zone Flex Pars:
Safe Zoning: Enabled
ISL Equal Cost: Enabled
Web Enabled: Enabled
API Enabled: Enabled
HA Mode: Disabled
Domain RSCN When enabled, this allows domain RSCNs to be
sent to registered members of the fabric.
Zoning RSCN When enabled, allows zoning RSCNs to be sent
to registered members of the fabric.
Limited Fabric
RSCN
When enabled, fabric RSCNs are suppressed
after an IPL.
Zone Flex Pars When set to fabric, RSCNs will only be sent to
affected fabric members when zoning
information changes. When set to none, filtering
of RSCNs will not take place, and RSCNs will
be sent to all zoneset members when zoning
information changes.
Safe Zoning Safe Zoning State.
ISL Equal Cost When enabled, all ISLs have the same cost.
Web Enable The enabled state of web.
API Enable API enable state.
HA Mode The enabled state of high availability mode.