FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
2-102
E/OS Command Line Interface User Manual
config
path may arrive ahead of older frames still in route over the older
path.
If rerouting delay is enabled, traffic ceases in the fabric for the time
specified in the config.switch.edTOV command. This delay allows
frames sent on the old path to exit to their destination before new
frames begin traversing the new path. Note that during this delay
period, frames addressed to the destinations that are being rerouted
are discarded if they are Class 3 frames and rejected if they are Class
2 or Class F frames.
Parameter This command has one parameter:
Command Example
Root> config switch rerouteDelay true
config.switch.RSCNZoneIsolation
Synopsis RSCNZoneIsolation RSCNZoneIsolationState
Description This command configures the state of RSCN Zone Isolation.
Parameters This command has one parameter:
rerouteDelayState Specifies whether rerouting delay is enabled.
Valid values are true and false. Boolean 1 and 0
may be substituted as values.
RSCNZoneIsolationState This parameter can be set to fabric and
none.
When set to fabric, RSCNs will only be
sent to affected fabric members when
zoning information changes.
When set to none, Filtering of RSCNs
will not take place, and RSCNs will be
sent to all zoneset members when
zoning information changes.