FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
CLI Commands
2-95
config
Command Example Root> Config SNMP validateUser Jerry v1 noauthnopriv
Username: Jerry
Auth Protocol: No Authentication
Priv Protocol: No Privacy
Security Model: V1
Security Level: No Authentication and No Privacy
Context Match: Prefix
Group Name: Group1
Read View: internet
Write View: management
Notify View: private
config.switch
All commands under this branch operate on a particular switch
attribute. Switch attributes are specific to the Fibre Channel switch
nature of the product.
Some of the config.switch commands require that the switch be set
offline. (Use the maint.system.setOnlineState to set the switch offline.)
If some of these commands are entered while the switch is online, an
error message results.
config.switch.apiState
Syntax apiState apiEnabledState
Purpose This command sets the state of the API interface. When disabled,
access through the API interface will be turned off.
Parameters This command has one parameter:
Read View The Read View access for this user.
Write View The Write View access for this user.
Notify View The Notify View access for this user.
apiEnabledState This parameter can be set to enable or disable.
Boolean 1 and 0 values may also be
substituted.