FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
2-94
E/OS Command Line Interface User Manual
config
experimental View Included .1.3.6.1.3
private View Included .1.3.6.1.4
snmpv3 View Included .1.3.6.1.6
fceos View Included .1.3.6.1.4.1.289
fcmgmt_3_1 View Included .1.3.6.1.2.1.8888
fcmgmt_3_0 View Included .1.3.6.1.3.94
fcfe View Included .1.3.6.1.3.42
system View Included .1.3.6.1.2.1.1
ip View Included .1.3.6.1.2.1.4
config.snmp.validateUser
Syntax validateUser username secModel secLevel
Purpose This command searches the User, Group, and Access tables for the
given username, security model, and security level. If the username,
security model, and security level cannot be traced in these tables, a
message will be displayed indicating why.
Parameters This command has three parameters:
Output This command displays the following switch configuration data:
username The username for the user to validate.
secModel The security model of the user.
secLevel The security level of the user.
Username The username.
Auth Protocl The authentication protocol used for this user.
Priv Protocol The privacy protocol used for this user.
Security Model The Security Model for this user.
Security Level The Security Level for this user.
Context Match The context match method.
Group Name The Group that this user belongs to.