FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
CLI Commands
2-93
config
Example config.SNMP> showV3GroupTable
SNMPv3 State: Enabled
Index Username Model Group Name
----- -------------------------------- ----- ----------
1 User1 V1 Group1
2
3
4
5
6
NOTE: This command and the command show.snmp.V3GroupTable on
page 22-226 has the same functionality.
config.snmp.showViewTable
Syntax showViewTable
Purpose This command displays the values for the VACM views presently
configured.
Parameters This command has no parameters.
Output This command displays the following switch configuration data:
Command Example
config.snmp> showViewTable
View Name Type Object ID
-------------------------------- ------------------ ---------
no_access View Excluded .1.3.6.1
internet View Included .1.3.6.1
management View Included .1.3.6.1.2
Username The username.
Model The Security model.
Group Name The group name.
View Name The name of the view.
Type The type of the view.
Object ID The Object ID.