FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
CLI Commands
2-91
config
Index: 1
Target IP: 172.19.16.169
UDP Port: 162
Community Name: public
MP Model: SNMPv1
Security Name: user1
Security Model: V1
Security Level: No Authentication and No Privacy
These are explained in the table below.
NOTE: The command show.snmp.targetTable on page 22-224 has functionality
that is same as that of this command.
config.snmp.showUserTable
Syntax showUserTable [index]
Purpose This command displays the users configured presently in the USM
table.
Parameters This command has no parameters.
SNMPv3 State Indicates whether SNMPv3 is enabled or
disabled.
Index The index number.
Target IP The IP address of the trap recipient.
UDP Port The UDP port of the trap recipient.
Community The community name.
MP Model The Messaging Model.
Secuirty Name The security name (user name).
Security Model The security model.
Security Level The security level.