FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
2-90
E/OS Command Line Interface User Manual
config
Config.SNMP> showAccessTable 1
Index: 1
Security Model: Any
Security Level: None
Group Name: group1
Read View: fcmgmt_3_1
Write View: fceos
Notify View: internet
config.snmp.showTargetTable
Syntax showTargetTable [index]
Purpose This command displays the configured values for the Target Table.
Parameters This command has one optional parameter:
Command Example
Config.SNMP> showTargetTable
SNMPv3 State: Enabled
Index Target IP UDP Port Community MP Model
----- ------------- -------- -------------------------------- --------
1 172.19.16.169 162 public SNMPv1
2
3
4
5
6
or
Specifying the index will give the following output:
Config.SNMP> showTargetTable 1
Security Level The security level.
Read View The read view name.
Write View The write view name.
Notify View The notify view name.
index Index of the access entry. Valid values are 1 to
6.