FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
CLI Commands
2-89
config
1 CommunityName1 Enabled 123.123.123.123 162
2 CommunityName2 Enabled 10.25.25.10 144
3 CommunityName3 Disabled 132.44.85.224 162
4 public Enabled 162
5
6
config.snmp.showAccessTable
Syntax showAccessTable [index]
Purpose This command displays the configured values for the Access Table.
Parameters This command has one optional parameter:
Command Example
Config.SNMP> showAccessTable
SNMPv3 State: Enabled
Index Group Name
----- ----------
1 group1
2
3
4 v1Group
5
6
7 v2Group
8
9
10 usmGroup
11 usmGroup
12
or
If you specify the index, the output of this command will contain the
following data:
index Index of the access entry. Valid values are 1 to
6.
Index Index of the access entry. Valid values are 1 to
6.
Group Name The group name.
Security Model The security model.