FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
2-86
E/OS Command Line Interface User Manual
config
config.snmp.deleteTargetEntry
Syntax deleteTargetEntry index
Purpose This command deletes the specified entry from the Target Table.
Parameters This command has one parameter:
Command Example
Root> config snmp deletetargetentry 1
config.snmp.deleteV3Group
Syntax deleteV3Group index
Purpose This command deletes the specified entries from the
Security-to-Group table.
Parameters This command has one parameter:
Command Example
Root> config snmp deleteV3Group 1
config.snmp.setSNMPv3State
Syntax setSNMPv3State enabledState
Purpose Enables / disables SNMPv3.
NOTE: If the SNMP User Table, Access Table, and Security-to-Group Tables
are not properly configured, SNMP access will be lost upon completion of
this command. Use the command config.snmp.validateUser to ensure proper
configuration of user entries.
Index Index of the target entry. Valid values are 1 to
6.
index Index of the user entry. Valid values are 1 to 6.