FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
CLI Commands
2-85
config
config.snmp.deleteAccessEntry
Syntax deleteAccessEntry index
Purpose This command deletes the specified entry from the Access Table.
Parameters This command has 1 parameter:
Command Example
Root> config snmp deleteAccessEntry 1
config.snmp.deleteCommunity
Syntax deleteCommunity commIndex
Purpose This command deletes an SNMP community and trap recipient, if
configured.
Parameters This command has one parameter:
Command Example
Root> config snmp deleteCommunity 5
config.snmp.deleteUserEntry
Syntax deleteUserEntry index
Purpose This command deletes the specified user entry from the User Table.
Parameters This command has one parameter:
Command Example
Root> config snmp deleteUserEntry 1
commIndex Index of the access entry. Valid values are 1 to
6.
commIndex Specifies the community to be deleted. Valid
values are integers in the range 1–6. This value
was set in the commIndex parameter of the
config.snmp.addCommunity command.
index Index of the user entry. Valid values are 1 to 6.