FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
CLI Commands
2-73
config
Parameters This command has one parameter:
Command Example
Root> config security ssl setWebState 0
config.security.ssl.setAPIState
Syntax setAPIState sslEnabledState
Purpose This command sets the enabled state for the SSL API interface. The
default API access is non-secure. If SSL is enabled, there is no visual
indication provided to the end user.
Parameters This command has one parameter:
Command Example
Root> config security ssl setAPIState 1
config.security.ssl.show
Syntax show
Purpose This command displays the SSL certificate, its MD5 and SHA-1
fingerprints, and the SSL enabled states for the web and API
interfaces.
Parameters This command has no parameters.
Command Example
Root> config security ssl show
sslEnabledState This parameter can be set to enable or disable.
Boolean 1 and 0 values may also be
substituted.
sslEnabledState This parameter can be set to enable or disable.
Boolean 1 and 0 values may also be
substituted.