FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
CLI Commands
2-69
config
Parameters This command has one parameter:
Command Example
Root> config security switchBinding setState allRestrict
config.security.switchBinding.show
Syntax show
Purpose This command displays the switch binding configuration.
Parameters This command has no parameters.
Command Example
Root> config security switchBinding show
switchBindingState Sets the switch binding state for the switch.
Valid values are:
disable - Disable switch binding. Devices
(servers, storage, and other switches) are
allowed to connect to the switch without
restrictions.
eRestrict - Enable switch binding and restrict
E_Port connections. E_Ports are prevented
from forming ISL connections unless
explicitly identified in the SBML. F_Port
connections are allowed without restriction.
fRestrict - Enable switch binding and restrict
F_Port connections. Server and (or) storage
devices are prevented from forming F_Port
connections with the switch unless explicitly
identified in the SBML. E_Ports are allowed
to form ISL connections without restriction.
allRestrict - Enable switch binding and restrict
E_Port and F_Port connections. Both E_Ports
and F_Ports prohibit connections with all
devices unless explicitly identified in the
SBML.