FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
2-68
E/OS Command Line Interface User Manual
config
Parameters This command has one parameter:
Command Example
Root> config security switchBinding deleteMember
AA:99:23:23:08:14:88:C1
config.security.switchBinding.setState
Syntax setState switchBindingState
Purpose This command sets the switch binding state on the switch.
wwn Specifies the switch or N_Port device WWN of
the member to be removed from the SBML. The
value of the WWN must be in colon-delimited
hexadecimal notation (for example,
AA:00:AA:00:AA:00:AA:00).
You may also enter all for this argument to clear
the SBML completely. Note that you cannot
clear a WWN that is currently logged into the
switch.