FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
CLI Commands
2-67
config
• Enabling Enterprise Fabric Mode automatically enables Switch
Binding.
• If Enterprise Fabric Mode is enabled and the switch or director is
online, you cannot disable Switch Binding.
• If Enterprise Fabric Mode is enabled and the switch or director is
offline, you can disable Switch Binding, but this also disables
Enterprise Fabric Mode.
• WWNs can be added to the SBML regardless of whether Switch
Binding is enabled or disabled.
config.security.switchBinding.addMember
Syntax addMember wwn
Purpose This command adds a new member to the SBML. A maximum
number of 256 members may be added to the SBML.
Parameters This command has one parameter:
Command Example
Root> config security switchBinding addMember
AA:99:23:23:08:14:88:C1
config.security.switchBinding.deleteMember
Syntax deleteMember wwn
Purpose This command removes a member from the SBML. You cannot
remove any member currently logged into the switch or director.
wwn Specifies the switch or N_Port device WWN of
the member to be added to the SBML. The value
of the WWN must be in colon-delimited
hexadecimal notation (for example,
AA:00:AA:00:AA:00:AA:00).