FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
CLI Commands
2-63
config
Root> config security portBinding wwn 4 attached
Root> config security portBinding wwn 4 remove
config.security.ssh.resetKeys
Syntax resetKeys
Purpose This command resets the SSH (secure shell) encryption keys to their
factory default (unconfigured). The next time a client connects using
SSH the server will generate new keys.
Parameters This command has no parameters
Command Example
Root> config security ssh resetKeys
config.security.ssh.setState
Syntax setState sshEnableState
Purpose This command sets the enabled state for the SSH interface. In order
for an SSH client connection to be accepted, the state must be set to
enable; otherwise, only Telnet can be accepted. Both SSH and Telnet
cannot be enabled at the same time.
Parameters This command has one parameter:
Command Example
Root> config security ssh setState enable
config.security.ssh.show
Syntax show
Purpose This command displays whether SSH is enabled or not.
Parameters This command has no parameters.
Command Example
config security ssh show
sshEnableState This parameter can be set to enable or disable.
Boolean 1 and 0 values may also be
substituted.