FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
CLI Commands
2-59
config
Output The fabric binding configuration data is displayed as a table that
includes the following properties of the Pending FBML.
Output Example The output from the config.security.fabricBinding.showPending
command appears as follows.
Domain 1 (20:30:40:50:60:70:8F:1A) (Local)
Domain 3 (00:11:22:33:44:55:66:77) (Unattached)
Domain 2 (88:99:AA:BB:CC:DD:EE:FF) (Attached)
Domain 14 (11:55:35:45:24:78:98:FA) (Attached)
config.security.portBinding
The Port Binding CLI commands enable you to “bind” a specific
switch or director port to the WWN of an attached node, switch, or
director for exclusive communication.
config.security.portBinding.bound
Syntax bound portNumber portBindingState
Purpose This command sets the port binding state for a given port.
Domain ID The domain ID of the FBML member. Valid
domain IDs range from 1 to 239.
WWN The world wide name (WWN) of the FBML
member in colon-delimited hexadecimal
notation.
Attachment
Status
Indicates whether the FBML member is Local,
Attached, or Unattached. For more information,
see Fabric Binding Membership Terminology on
page 2-53.