FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
2-58
E/OS Command Line Interface User Manual
config
Purpose This command displays the fabric binding configuration (active
FBML) saved on the fabric. It performs the same function as
show.preferredPath.showState on page 2-218.
Parameters This command has no parameters.
Command Example
Root> config security fabricBinding showActive
Output This command displays the following fabric binding configuration
data:
Output Example The output from the config.security.fabricBinding.showActive command
appears as follows.
Domain 1 (20:30:40:50:60:70:8F:1A) (Local)
Domain 3 (00:11:22:33:44:55:66:77) (Unattached)
Domain 2 (88:99:AA:BB:CC:DD:EE:FF) (Attached)
Domain 14 (11:55:35:45:24:78:98:FA) (Attached)
config.security.fabricBinding.showPending
Syntax showPending
Purpose This command displays the pending FBML, which may not reflect
what is active on the fabric.
Parameters This command has no parameters.
Command Example
Root> config security fabricBinding showPending
Domain ID The domain ID of the FBML member. Valid
domain IDs range from 1 to 239.
WWN The world wide name (WWN) of the FBML
member in colon-delimited hexadecimal
notation.
Attachment
Status
Indicates whether the FBML member is Local,
Attached, or Unattached. For more information,
see Fabric Binding Membership Terminology on
page 2-53.