FW 08.01.00 McDATA E/OS Command Line Interface User Manual (620-000134-740, November 2005)

2
CLI Commands
2-57
config
config.security.fabricBinding.deleteMember
Syntax deleteMember wwn domainId
Purpose This command removes a member from the Pending FBML in the
fabric binding work area. The local member and attached members
cannot be deleted from the list.
NOTE: Changes are not activated to the fabric until the activatePending
command is issued.
Parameters This command has two parameters:
Command Examples
Root> config security fabricBinding deleteMember
AA:99:23:23:08:14:88:C1 2
config.security.fabricBinding.replacePending
Syntax replacePending
Purpose This command replaces the Pending FBML with the fabric binding
configuration that is currently loaded on the fabric.
Parameters This command has no parameters.
Command Example
Root> config security fabricBinding replacePending
config.security.fabricBinding.showActive
Syntax showActive
wwn WWN of the member to be removed from the
Pending FBML. The value of the WWN must be
in colon-delimited hexadecimal notation (for
example, AA:00:AA:00:AA:00:AA:00).
domainId The domain ID of the member to be removed
from the Pending FBML. Valid domain IDs
range from 1 to 239.