FW 07.01.02/HAFM SW 08.06.00 HP StorageWorks Edge Switch Release Notes (AA-RTDZH-TE, August 2005)

Embedded Audit
Log
The Audit log is a new log available through CLI and EWS. This is not the same Audit
Log available through HAFM. The log records all configuration changes to the switch to
provide data for analyzing problems caused by configuration changes.
Embedded Por t Log
The Embed ded Port Log is a new log that records all Fibre Channel trafficfromorto
the embedded port. This log is actually implemented as two logs, one that a llows entry
wrapping and one that stops adding entries when filled. The logs allow filtering based
on Class F frames, as well as by port number, to isolate specificeventsorproblems.
This feature is intended for advanced users to diagnose and troubleshoot trafficproblems
withinaSAN.TheEmbeddedPortLogisavailableviaEWS,CLI,andHAFM.
Embedded Fabric Log
The switch-based fabric log records events related to the following services:
• Fabric Co
ntroller
• Path Selection
• Login Server
• Name Ser
ver
The Fabric log is actually implemented as t wo logs, one that a llows entr y wrapping and
one that stops adding entries when filled. This log is intended to provide information for
analyzing fabric and switch behaviors and problems. The Fabric log is available via
EWS, CLI, and HAFM.
OSMS change
Open Systems Management Server (OSMS) is now available as a standard feature.
OSMS can be enabled/disabled via EWS, Command Line Interface (CLI), and HAFM.
Default zone is disabled by default
ThedefaultzoneontheEdgeSwitch2/12,EdgeSwitch2/24,andEdgeSwitch2/32
is disabled by default. Zoning must be con fig ured in order for any devices connected to
the edge switches to com municate.
Some IP addresses must be avoided
If you use HAFM to manage other M-Series Fabric directors and edge switches, when
you select IP addresses for edge switches, directors, and for the HAFM appliance, do
not use IP addresses in the following range:
16