FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4300 Fabric Switch Installation and Service Manual (620-000171-010, April 2005)

Diagnostics
3-3
Table 3-3 on page 3-3 lists event codes and the corresponding MAP
references. The table provides a quick start guide if an event code is
readily available.
Table 3-3 Event Codes versus Maintenance Action
Event
Code
Explanation Action
011 Login Server database invalid. Go to MAP 0600.
021 Name Server database invalid. Go to MAP 0600.
031 SNMP request received from unauthorized community. Add a community name through
the SANpilot interface.
051 Management Server database invalid. Go to MAP 0600.
052 Management Server internal error. Go to MAP 0600.
061 Fabric Controller database invalid. Go to MAP 0600.
062 Maximum interswitch hop count exceeded. Go to MAP 0600.
063 Remote switch has too many ISLs. Go to MAP 0600.
070 E_Port is segmented. Go to MAP 0600.
071 Switch is isolated. Go to MAP 0600.
072 E_Port connected to unsupported switch. Go to MAP 0600.
073 Fabric initialization error. Go to Collect Maintenance Data
on page 4-22.
074 ILS frame delivery error threshold exceeded. Go to Collect Maintenance Data
on page 4-22.
080 Unauthorized worldwide name. Go to MAP 0500.
081 Invalid attachment. Go to MAP 0500
120 Error detected while processing system management command. Go to Collect Maintenance Data
on page 4-22.
121 Zone set activation failed - zone set too large. Reduce size of zone set and retry.
140 Congestion detected on an ISL. Go to MAP 0600.
141 Congestion relieved on an ISL. No action required.
142 Low BB_Credit detected on an ISL. Go to MAP 0600.