FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4300 Fabric Switch Installation and Service Manual (620-000171-010, April 2005)

2
2-48
McDATA Sphereon 4300 Fabric Switch Installation and Service Manual
Installation Tasks
• Delete all zones - To delete all configured zones and zone
members, click Delete All Zones. A confirmation dialog box
displays. Click OK to delete all zones.
• Delete a single zone - To delete a single zone and its zone
members, click the Delete button adjacent to the zone name. A
confirmation dialog box displays. Click OK to delete the zone.
• Go to zones- If a zone set contains more than 64 zones, the Go
to zones link activates to display subsequent pages. In addition,
the Go to zones link activates on subsequent displayed pages.
4. To add devices (members) to the zone, click the zone name
(Zone-1). The Zoning page displays with the Modify Zone tab
selected (Figure 2-29 on page 2-48).
Figure 2-29 Configure Panel (Zoning Page with Modify Zone Tab)
5. To rename a configured zone, type the new name in the Zone field
and click Rename Zone. After the name is validated, the zone name
is changed.
6. Add or delete zone members as follows: