FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4300 Fabric Switch Installation and Service Manual (620-000171-010, April 2005)

2
2-38
McDATA Sphereon 4300 Fabric Switch Installation and Service Manual
Installation Tasks
Install PFE Keys
(Optional)
Perform this procedure to install optional features. After purchasing a
feature, obtain the required product feature enablement (PFE) key by
following the enclosed instructions. A PFE key is an alphanumeric
string consisting of both uppercase and lowercase characters. The
total number of characters may vary. The key is case sensitive and
must be entered exactly, including dashes. The following is an
example of a PFE key format:
XxXx-XXxX-xxXX-xX.
After obtaining the PFE key, install the feature as follows:
1. Set the switch offline as follows:
a. At the Configure panel, select the Operations option at the left
side of the panel. The Operations panel opens and the Switch
page displays with the Beacon tab selected
b. Click the Online State tab, then click Set Offline. The message
Your operations changes have been successfully activated
appears.
2. At the Configure panel, select the Operations option at the left side
of the panel. The Operations panel opens with the Switch page
displayed.
3. Click the Feature Installation tab. The Operations panel opens with
the Feature Installation page displayed (Figure 2-21).
Figure 2-21 Operations Panel (Feature Installation Tab)