FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4300 Fabric Switch Installation and Service Manual (620-000171-010, April 2005)

2
Installation Tasks
2-33
Installation Tasks
Figure 2-18 Configure Panel (Security Page with Fabric Binding Tab)
2. The Fabric Binding tab is divided into sections by the following
headings. Configure fabric binding from the following:
• Fabric Binding Status—Identifies whether Fabric Binding is active
or inactive on the product.
• Actions to Modify the Active Fabric Binding Membership List
(FBML)—Enables you to activate and deactivate Fabric Binding
using the following buttons:
— Activate: By selecting this button, you save the pending FBML
as the active FBML and activate Fabric Binding.
— Deactivate: By selecting this button, you change the Fabric
Binding status from active to inactive, disabling Fabric
Binding.
• Actions to Modify the Pending Fabric Binding Membership List
(FBML)—Enables you to modify the pending FBML using the
following buttons: