FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4300 Fabric Switch Installation and Service Manual (620-000171-010, April 2005)

2
2-32
McDATA Sphereon 4300 Fabric Switch Installation and Service Manual
Installation Tasks
• The switch or device with the WWN is connected to a port that is
blocked.
To delete a member or all members from the SBML, perform the
following procedure:
1. Select Configure from the navigation panel.
2. Select the Security tab and the Switch Binding tab.
3. Select the Delete button next to the listing for the member.
4. At the Are you sure you want to delete this member? prompt, click
OK. The SBML redisplays without the deleted member.
5. If you want to delete all of the members of s switch bindling
membership list, select Delete All Members from the Switch Binding
Membership List.
Configure Fabric
Binding
Perform this procedure to configure fabric binding by attached fabric
member (domain ID and WWN). The SANtegrity binding feature
must be installed to access this control. Refer to Install PFE Keys
(Optional) on page 2-38 for instructions. If the feature is not installed,
the message This Feature Not Installed appears. To configure fabric
binding:
1. At the Configure panel, click the Fabric Binding tab. The Security
page displays with the Fabric Binding tab selected (Figure 2-18).